Floors and surfaces should be cleaned based on their material type. For example, marble is one of the common materials used for tiles and kitchen surfaces. This unique earthy tile material must be cared for and cleaned appropriately to maintain its cute appearance. Learn how to clean them right if you want to maintain their shine and resilience over the years.
Prevention is Better
Marble can easily be scratched, which makes it difficult to clean and maintain. It is best, therefore, to request family and friends to leave their outdoor shoes outside the door. This is an effective way of reducing the amount of debris that can potentially damage the floors.
Also, have sleepers ready for them to discourage them from getting into the house with dirty shoes. Another preventive measure is to spot clean stains as soon as they come up. Then, use ammonia or hydrogen peroxide mixtures in water to clean.
Effective DIY Cleaning Routine
Even though preventing dirt is good, keeping the marble floors clean is not effective. To clean, proceed as follows:
- Prep the floors.
Start by cleaning the floors, and focus on areas with an accumulation of debris, such as the doors and entryway. If dusting is insufficient, consider dry mopping to get rid of the stuck dirt, as this will help minimize any damage to the floor.
- Wet Mopping
Using a wet mop and bucket of plain water, clean any remaining dirt with the mop. It is also okay to use marble cleansers in case you have stubborn stains. Change your water as it gets dirty to prevent smears.
- DIY Cleaner
Once you finish the initial mopping, a cleaning solution with 5 cups of ammonia and one gallon of water. Repeat mopping with this solution, ensuring only to use it in well-ventilated places. Also, wring out the mop cloth before using it.
- Extra Strength Cleaning
Some cases may call for a stronger cleaning mixture. If this is so, then a quart of plain water and mix in 2 tablespoons of ammonia. To make a cleansing paste, you can also mix baking soda with ammonia or hydrogen peroxide.
Apply the mixture to the affected areas and avoid scrubbing, which could cause scratches. After about 30 minutes, rinse with warm water and ensure that all the cleaning solution is eliminated. Once you are done cleaning, you can use a soft towel to dry the floor as this helps eliminate any residues and minimizes the formation of water stains.
Marble floors are a thing of beauty. However, they take work to maintain, and there are no shortcuts. Make sure to keep up with the cleaning routine. Once in a while, have p[rofessioansl from BizFloors come in to help reseal the natural stone if you live in the greater Houston, TX region. You will not regret having marble floors if willing to do the work.